Masterline Series

"See, Bruce. I promised...You're not ready for this at ALL." Prime 1 Studio is proud to present an iconic addition to the Museum Masterline Series of DC statues: the 1:3 Scale MMDC-62S THE JOKER BATSUIT CONCEPT DESIGN by JORGE JIMENEZ BONUS VERSION from DC COMICS! Appearing in Batman #99 of The Joker War arc, The Joker has further violated not only Batman's property but also his teetering psyche! He has committed yet another unimaginable act of perversion! The Joker has reanimated Alfred's dead body and stolen the Future Batsuit that Alfred made for Batman...a future where Batman would have been ready to become a brighter symbol of Gotham! However, that brighter future is in peril as The Joker has taken Batman's Future Suit and defiled it with his own take on the Caped Crusader's costume. In this 31-inch-tall statue, the talented artists at Prime 1 Studio have delivered another comic-accurate masterpiece! The Joker is at his most colorful in this Future Batsuit replete with bright blues, an eye-catching purple cape, and as his malicious tweaking of the Batsuit shows...the bright red smile over the Bat symbol and his trademark HA-HA-HA's all over the place. The Joker's malevolent sneer comes in a couple of unique swappable heads: The Joker can either be fully cowled, or he can be wearing a half-destroyed cowl, showing more of his evil intent. And when you pre-order this Bonus Version from our official online store or any authorized distributor will you receive a cool, extra Bonus Part: a completely unmasked swappable head. The Joker's malevolence is on full display! The Joker poses with a couple of Batarangs he has corrupted for his own use. He stands on another of Batman's nightmare scenarios: a completely demolished and totaled Batmobile environmental base! MMDC-62S: The Joker Batsuit Concept by Jorge Jimenez Bonus Version will be an instant Pre-Order for Batman and Jorge Jimenez fans everywhere, so don't wait. Pre-Order now! Product Specifications: - Statue Size approx. 79 x 62 x 54 cm - Demolished Batmobile-themed Environmental Base - Three (3) Swappable Heads [Fully Cowled, Half Cowled, Unmasked (BONUS PART)] Limited Edition. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

Not only is Prime 1 Studio excited and proud to Sinestro into our Museum Masterline Series, but we have also added one of Sinestro's foot soldiers into the line: the 1:3 Scale MMDC-61 Sinestro Corps Tri-Eye from DC! Display this Sinestro Corps foot soldier by Sinestro's side! Tri-Eye is one of the Sinestro Corps' more fear-inducing members! At almost 21 inches tall, Tri-Eye's backstory tells that he has been known to inhabit the bottom of wells or springs. And when an unsuspecting passer-by tries to take a drink, Tri-Eye attacks, and his three mouths rend flesh and bone so that no trace of the victim remains! Sinestro definitely picked a fearsome creature to make into one of his terror troops! MMDC-61 Tri-Eye is limited to 300 pieces, so if you want to display him proudly next to his leader, better get a jump on it and Pre-Order now! Features: - Statue Size: 54 x 32,8 x 32 cm - Sinestro Corps-themed Environmental Asteroid-strewn Base - Limited Quantity Made Limited Edition of 300 pcs worldwide. Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"If you two are the jokes, and trust me, I've been watching you. You *are* the jokes...Then I'm the Punchline. I'm where you end." Prime 1 Studio is wildly excited to announce the coolest addition to our Museum Masterline Series: The 1:3 Scale MMDC-54DXS: Punchline Deluxe Bonus Version Concept Design by Jorge Jimenez! Billed as the "Anti-Harley Quinn", Punchline has captivated the hearts and imaginations of Batman comics fans everywhere! Punchline is as beautiful as she is every bit lethal. She plays...but she doesn't play...as the Batman and his colleagues eventually find out! The incredible artists at Prime 1 Studio took the greatest time and effort to study Jorge Jimenez's concept of Punchline so that they could replicate his art style in statue form. Take one look at this ravishing statue, and you will agree! Punchline has a playful look to her, but don't let that fool you. She is both dangerous and determined. And The Studio's sculptors have made certain to capture these looks in her beautiful face. Our adept painters have also followed Jorge's inspired choice of colors and applied them to Punchline's head, face, and clothing. Her bolt of blue hair, and her swath of purple are perfectly contrasted against the rest of her head. Her tight-fitting purple top a bright backdrop to her slick and glossy dress. Jorge wanted to show Punchline as a force to reckon with, so she is posed with two knives, as if ready to cut the next person who speaks ill of The Joker. The Deluxe Bonus Version comes with three (3) unique and different swappable heads because someone as bombastic and energized as Punchline certainly deserves more than one look...be it playful, sinister, or something else, we have the look for her! This magnificent and deadly beauty stands on top of a Joker Hideout-themed base, complete with numerous small touches that provide a fuller storytelling experience. Look closely, and you will see film reels, TVs, and even a familiar Cutie1 doll of someone we all know and love. Only when you pre-order this Deluxe Bonus Version from our official online store or any authorized distributor will you receive cool Bonus Parts: one (1) more swappable head only available with this version, and 1 out of 500 Limited Edition, hand-signed Art Prints by Jorge Jimenez! Fans of Jorge Jimenez will no doubt flock to Pre-Order this deadly damsel. Everyone will want to snap this up as soon as it's available! Product Specifications: - Size: 85 x 50 x 35 cm - Punchline Statue on a Joker Hideout-themed base - Three (3) Swappable Heads - One (1) Swappable Bonus Head [BONUS PART] - One (1) 1/500 Limited Edition Jorge Jimenez Hand-Signed Art Print [BONUS PART] Limited Edition of 500 pcs worldwide. Please note: Due to the small edition size and the great demand for this item, allocations are possible. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

Prime 1 Studio is proud to present an amazing, eagerly anticipated statue in the Museum Masterline DC Theatrical Series: the limited 1:3 Scale Black Adam Vigilante Edition from 2022's Black Adam! After 5,000 years, Teth-Adam has been awakened to a very different world. While many things might be unfamiliar to him, he will always know the stench of evil and injustice! Empowered by ancient Egyptian gods, Black Adam is unstoppable. While not an outright villain, Black Adam is an antihero out to punish those who have evil in their heart. The Black Adam Vigilante Edition portrays Black Adam in the wrathful visage of his enormous bulk, deadly serious stare, and jet-black armor...signifying that he is determined to mete out deadly punishment to those who deserve it. At a breathtaking 37.8 inches tall and enrobed in his removable fabric cape, Black Adam floats above his Khandaq-themed base, with the Black Adam film logo emblazoned front and center. Black Adam comes with two (2) swappable heads portraying a serious tone, and a deafening scream. His eyes and chest symbol light up with the power of LED illumination to showcase the power of Shazam! This film and statue have both been long in the making...but now, they are both ready for you! Pre-Order the MMBA-02 Black Adam Vigilante Edition limited to 300 pieces today and hold the power of Shazam! in your hands before they run out!!! Product Specifications: - Statue Size approximately 37.8 inches tall [H:96cm W:51cm D:59cm] - Khandaq-themed base - LED Illumination in the Chest - One (1) Swappable Head - One (1) Pair of Swappable Hands - One (1) Removable and Poseable Fabric Cloak - One (1) Swappable Head with LED Illuminated Eyes Limited to 300 pieces. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

Prime 1 Studio is proud to present an amazing, eagerly anticipated statue in the Museum Masterline DC Theatrical Series: the 1:3 Scale Black Adam Champion Edition from 2022's Black Adam! After 5,000 years, Teth-Adam has been awakened to a very different world. While many things might be unfamiliar to him, he will always know the stench of evil and injustice! Empowered by ancient Egyptian gods, Black Adam is unstoppable. While not an outright hero, Black Adam is an antihero out to punish those who have evil in their heart. The Black Adam Champion Edition portrays Black Adam in the enlightened and powerful visage of his enormous bulk, deadly serious stare, and golden armor...signifying that he is determined to mete out punishment to those who deserve it, though they may not deserve death. At a breathtaking 37.8 inches tall and enrobed in his removable fabric cape, Black Adam floats above his Khandaq-themed base, with the Black Adam film logo emblazoned front and center. Black Adam comes with two (2) swappable heads portraying a serious tone, and a deafening scream. His eyes and chest symbol light up with the power of LED illumination to showcase the power of Shazam! This film and statue have both been long in the making...but now, they are both ready for you! Pre-Order the MMBA-01 Black Adam Champion Edition today and hold the power of Shazam! in your hands before they run out!!! Product Specifications: - Statue Size approximately 37.8 inches tall [H:96cm W:51cm D:59cm] - Khandaq-themed base - LED Illumination in the Chest - One (1) Swappable Head - One (1) Pair of Swappable Hands - One (1) Removable and Poseable Fabric Cloak - One (1) Swappable Head with LED Illuminated Eyes Limited edition. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"Let me feel the pain. Get up and pierce some flesh and bone!" Prime 1 Studio is proud to present the latest addition to the Ultimate Premium Masterline Series: The incredible 1/4 Scale Guts Berserker Armor, Deluxe Rage Edition from Berserk! Straight from the mind of Kentarou Miura comes the warrior of eternal struggle: Guts! Guts is unmistakably powered by rage! Here, he cuts a swath through Evil with his new sword, Dragonslayer, an unbelievable, prosthetic left arm, and a renewed thirst for revenge! Prime 1 Studio offers our masterstroke interpretation of Guts - clad head to toe in his awesome Berserker Armor and armed with his massive Demonslayer sword. This Rage Edition standing approximately 27 inches tall with his cape sweeping behind him in a dramatic arc. Guts' Berserker Armor is faithfully recreated with multi-layered paint applications, weathering and washes to bring out every minute detail and texture. On the base, this tortured warrior wades through a demonic hellscape of death. We made certain to drench this environment with all the horror, carnage and blood we could muster! The Deluxe version Guts comes with three (3) swappable helmets. Swap out Guts' helmet from one with glow-red eyes where you can see his rage boiling over to one when he is in control of himself where you can see his real eyes through the helm's eye sockets. Or a swap out Guts with the original berserker armor helmet before it changed shape like the Beast of Darkness! And when he is no longer in control from his insane killing sprees, putting Astral Projection Schierke on his shoulder to calm his bloodlust and bring him back down to Earth. Let the Guts Berserker Armor, Rage Edition Deluxe version fight its way into your collection! A must for every die-hard Berserk fan! Specs: - Product Size: 67 x 69 x 64 cm - Product Size with with Astral Schierke: 75 x 69 x 64 cm - Berserk themed base - Three (3) Swappable Heads - One (1) Swappable Astral Projection Schierke Limited edition. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

Prime 1 Studio is proud to present the latest addition to the Museum Masterline Series: MMBR-02DXS 1:3 Scale Guts Berserker Armor Unleash Edition Deluxe Bonus Version from Berserk! The incredible artists at Prime 1 Studio bring you another breathtaking statue of Guts, the Black Swordsman! Our interpretation of Guts - ready for a knockdown, drag out fight is at a jaw-dropping 47.6 inches tall to the very tip of Dragonslayer!!! His cape sweeps around him to emphasize his iconic stature; his grim demeanor sets the tone. Guts' Berserker armor is faithfully recreated with multi-layered paint applications, weathering, and washes to bring out every infinitesimal detail and texture. His dark and jagged base is littered with the bodies of the demons he's already defeated as he wades through a demonic hellscape of death. The LED Illumination in the base is sure to throw a bloody, dramatic light on this amazing statue! This Deluxe Bonus Version includes (3) stunningly accurate swappable Head Portraits of Guts with their own Head Stands. So, you can provide your own storytelling as you display the tortured warrior in your fan cave! Guts also comes with three (3) different Swappable Right Arms in different positions to give you choices in how ready for battle he is. And when you pre-order this Deluxe Bonus Version from our official online store or any authorized distributor will you receive a cool, extra Bonus Part: a fourth Swappable Head Portrait of Guts on its own Head Stand, featuring a comic base to his face. But still ready to unleash holy hell! Let the MMBR-02DXS Guts, Berserker Armor Unleash Edition Deluxe Bonus Version fight its way into your collection! This is a sure win for every die-hard Berserk fan! Product Specifications: - Statue Size: 121 x 67 x 43 cm ·Berserk-themed Base ·LED-Illuminated function on the base ·Three (3) Swappable Head Portraits ·Three (3) Swappable Right Arms ·Two (2) Berserker Armor-themed Head Stands ·One (1) Swappable Bonus Comic Base Portrait [BONUS PART] ·One (1) Bonus Berserker Armor-themed Head Stand [BONUS PART] Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"You say I'm fated to die in this suit. My victory says otherwise." -Batman Enter the treacherous Bat-Suit, a daring choice that seeks power at a price! Prime 1 Studio introduces DC fans to the super-ultimate release from our Batman lineup, the UPMDC-06DXS Ultimate Premium Masterline Batman Hellbat "Concept Design by Josh Nizzi" DX Bonus Version. Batman equips his Hellbat suit and embarks on a grueling mission to resurrect his deceased son, Damian Wayne, while facing off against the DC Universe's most formidable villain, Darkseid. The Hellbat, forged by the Justice League and designed by Batman, is a double-edged blade that trades tremendous strength for the wearer's life. Prime 1 Studio proudly collaborated with renowned concept artist Josh Nizzi to extract the full might of this high-risk, unforgiving menace of a suit. The exo-suit's surreal attack and evasive capabilities are evident in the energy-based broadsword and the large wings forming from its back. The helmet's red eye visor and the chest insignia on the mechanical torso scream "Don't mess with me." Josh Nizzi also adds a touch of originality and depth by highlighting the muscle lines across the whole body with red lines, showcasing the overall flexibility and durability of the nano-kinetic metallic suit. Inspired by the planet Apokolips, the base is finely finished with embedded LEDs, creating illuminating flames and a metallic red bat symbol that guides you to the battleground. The Deluxe version includes an extra swappable head, right arm, left hand, and 3 swappable right hands for you to recreate detailed scenes from the comics. It also includes swappable armor with extra spiky armor plating, so your Hellbat is extra ready to take on the evil wrath of Darkseid. That's not all, by purchasing the Deluxe bonus version from our official online store and authorized distributors, you can get another swappable headpiece. This legendary suit, crafted with the combined wisdom of the Justice League to challenge even Darkseid, is a must-have addition to your collection. Bring justice to your display by Pre-ordering the UPMDC-06DXS Ultimate Premium Masterline Batman Hellbat "Concept Design by Josh Nizzi" DX Bonus Version now! Specifications: - Statue Size Approximately: 29 inches [H:76cm W:49cm D:40cm] - Statue Size Approximately: 29 inches with right hand as pointing finger and left hand without sword [H:76cm W:47cm D:38cm] - Apokolips -themed base - LED Illumination flames on base - Two (2) Swappable head - Two (2) Swappable armor plating (Longer Spikes) - Two (2) Swappable left hand (No Sword) - Two (2) Swappable right arm (Arm Raised) - Four (4) Swappable right hands (Hand Open, Hand Down & Pointing Finger) - One (1) Bonus swappable head [BONUS PART] Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

Prime 1 Studio is proud to present the 1:4 scale UPMHZD-02 Stalker from Horizon Zero Dawn. The Stalker is one of the toughest and most unique machines that Aloy faces in Guerrilla's award-winning action role playing game, Horizon Zero Dawn. The Stalker is a medium-sized combat-class machine with a unique ability in its bag of tricks: stealth. Unlike other machines in the game which are openly aggressive, the Stalker has the ability to blend in with its environment to make it nearly impossible for any human to defeat.The Stalker stands poised to strike. Aloy better watch out! We present the Stalker with an adjustable jaw and swappable LED eyes. Its size, shape, and armor have been designed with extreme attention to detail in conjunction with Guerrilla, to create the most accurate video game portrayal ever.It can be displayed with the UPMHZD-01 Aloy Shield Weaver Armor Set companion piece to recreate the epic combat engagement from the video game. Pre-order Now!Product Specifications:- Size: 67.8 x 62.8 x 68.8 cm- Adjustable Jaw position- One (1) designed theme base- One (1) swappable Blue LED Eyes- One (1) swappable Yellow LED EyesPlease note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse.

Read More

"Clawstriders may be fast, but they're no match for a hunter with a plan" - Aloy Prime 1 Studio is very proud to present the next entry to the Ultimate Premium Masterline series, here is the 1:4 scale UPMHFW-01S Clawstrider Bonus Version from the critically acclaimed mega-hit sequel Horizon Forbidden West. We take you back into the immersive world of Horizon, once again with this jaw-dropping statue capturing the essence of its iconic protagonist, Aloy. Born in a post-apocalyptic world where nature has reclaimed the ruins of a forgotten civilization. Amongst her foes are the Clawstriders, formidable machines that resemble large predatory cats, originally designed by the AI HEPHAESTUS. Designed to kill and hunt, they are known for their speed and agility, making them challenging adversaries, but nothing our heroine can't handle - as she easily overrides and uses them as mounts to quickly travel across the post-apocalyptic world. Prime 1 Studio brings to life a 26-inch-tall recreation of this beautiful combat machine, as always with the utmost care and attention to detail in conjunction with Guerilla, capturing the ferocity and elegance both at the same time. From its sleek metallic frame to the menacing curvature of its claws, every inch and aspect of the Clawstrider is faithfully recreated, making it a true collector's treasure. Standing atop a base adorned with lush foliage, this statue immerses you in the untamed wilderness of the Forbidden West. We present the Clawstrider with swappable LED eyes for the perfect display. When you order the bonus version from our official store or any authorized distributor, you will receive a Horizon Forbidden West title display plate. Another beautiful masterpiece for fans and collectors alike, the UPMHFW-01 Clawstrider is sure to command attention and admiration in any collection. Pre-order it today, as well as its companion piece, the UPMHFW-02 Aloy Tenakth Dragoon Armor set, and bring home the epic adventure of Horizon Forbidden West. Product Specifications: - Statue Size approximately 26 inches tall [H:68cm W:58cm D:61cm] - Horizon-themed base - Two (2) Swappable Blue & Red eyes - LED-illuminated Eyes - One (1) Logo display plate [BONUS PART] Read More

"There's nothing I wouldn't do to save this world. No depth I won't explore, no secret I won't unlock, no barrier I won't cross. This mission is mine alone" Prime 1 Studio is very proud to present the next entry to the Ultimate Premium Masterline series, from the critically acclaimed mega-hit sequel Horizon Forbidden West, here is the 1:4 scale UPMHFW-02S Aloy Bonus Version in her Tenakth Dragoon Armor set. We take you back into the immersive world of Horizon, once again with this jaw-dropping statue capturing the essence of its iconic protagonist, Aloy. Born in a post-apocalyptic world where nature has reclaimed the ruins of a forgotten civilization, Aloy's journey is one of discovery, courage, and heroism. She ventures into the Forbidden West to confront new dangers and unravel the secrets that hold the fate of her world in balance. Our talented artisans at Prime 1 have brought this 28-inch-tall statue of Aloy to life in stunning detail, adorned in the formidable Tenakth Dragoon Armor set, a testament to her resilience and strength. With her spear held high, she exudes determination and grace, her hair flowing caught in the wind as she triumphantly stands atop a defeated Burrower, its cold and dark metal contrasting beautifully with the saturated warmth of Aloy's colors. We've included a swappable pair of arms, displaying wielding the spear in the right hand, drawing back and ready to launch as the left hand extends forward for balance. The fallen Burrower also has an LED-illuminated eye, swappable between a cold blue or a warm yellow. When you order the Bonus version from our official store or any other authorized distributor, you will receive an additional swappable head part, revealing her beautiful and determined face as well as its headstand. This masterpiece is a must-have for fans and collectors alike, a timeless tribute to one of gaming's most beloved heroines. Pre-order the UPMHFW-02 Aloy Tenakth Dragoon Armor set today, as well as her companion piece UPMHWF-01 Clawstrider, and bring home the epic adventure of Horizon Forbidden West. Product Specifications: - Statue Size approximately 27 inches tall [H:69cm W:50cm D:42cm] (Holding spear with both hands) - Statue Size approximately 28 inches tall [H:73cm W:50cm D:42cm] (Holding spear with one hand) - Horizon-themed base - One (1) Swappable pair of arms and weapon (Spear held with both hands) - One (1) Swappable pair of arms and weapon (Spear held with one hand, free left hand) - Two (2) Swappable blue and yellow eyes - LED-illuminated eyes - One (1) Additional swappable head-part (Unmasked) [BONUS PART] - One (1) Headstand [BONUS PART] Read More

"Always" Prime 1 Studio is proud to present our first collaboration with Shumi Arts, a hyper-realistic statue maker based in South Korea. Introducing our first entry to the highly coveted Platinum Masterline, the 1/4 scale PMLHP-01 Severus Snape from the Harry Potter movie franchise! Severus Snape is the Potions Master at Hogwarts School of Witchcraft and Wizardry. Portrayed by Alan Rickman, Professor Snape's enigmatic, mysterious character is widely regarded as one of the standouts from the movie series, earning him a very special place in the hearts of many fans worldwide. The artists from Prime 1 Studio and Shumi Arts have come together to meticulously craft 150 statues with the utmost level of expertise, bringing you the most lifelike statue of Alan Rickman's Master of Potions. Standing at 21 inches tall, Snape has a stern look, wand in hand. The artists at Shumi Arts have proven time and time again that they are the best at what they do, and it really shows in the detail of this perfect replication of the Head of Slytherin. The dark, fabric-woven garments may be simple, but emphasize his air of authority, mystery, and elegance. Snape wears a long black coat that stops at the knees. Underneath is a dark shirt with a high buttoned collar, contributing to his refined and austere appearance. The black robe is another item that adds to his ever-imposing presence, which can be removed for the perfect display option. He stands atop an obsidian base that has been sculpted with a smoke design all around. Rickman's Snape is a masterful portrayal that has left an indelible impact on both Harry Potter books and movie franchise fans. His captivating performance helped elevate Snape into one of the most iconic and memorable characters in the wizarding world. Take advantage of this very limited collaboration and pre-order the PLMHP-01 Severus Snape now, so that he can tell you to turn to page 394 in the comfort of your home. Specifications: - Statue Size Approximately 21 inches [H: 55 W: 25cm D: 23cm] - Obsidian Smoke-themed base Limited Edition of 150 pcs worldwide. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

Prime 1 Studio is proud to present Ultimate Premium Masterline Guyver 05: Guyver Gigantic from Guyver: The bioboosted Armor. The Guyver Gigantic is a greatly enhanced version of the standard Guyver Bio-Armor. What makes this version of the Guyver so special, aside from it is tremendous destructive power, is that it was created through the force of human will. Sho Fukamachi is responsible for bringing the Gigantic into being and has since been using it to undermine Cronos new world order. The Guyver Gigantic statue comes with 2 interchangeable right-arms and switchable set of High-Frequency Swords short and long. The Exclusive version of UPMGV-05EX: Guyver Gigantic includes a dead Hyper Zoanoid Branchai "Fake Gigantic" head to be displayed on the base. Don't miss out to own this in your Guyver Collection! Specifications: - Statue Size approximately 33 inches tall [(H):84.7cm (W):50.6cm (D):48.7cm] - One (1) designed theme base - Two (2) interchangeable Right-arms - One (1) switchable set of High-Frequency Swords Short - One (1) switchable set of High-Frequency Swords Long - One (1) Hyper Zoanoid Branchai "Fake Gigantic" Head (In the Exclusive Version Only) Limited Edition. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"Your drill is the drill that will pierce the heavens." - Kamina Prime 1 Studio is very proud and thrilled to present the next entry to the Ultimate Premium Masterline series, from the immensely popular and influential Mecha anime Tengen Toppa Gurren Lagann, here is the UPMGL-01DXS Kamina, Simon & Yoko with Lagann Deluxe Bonus Version. Embark on epic adventure with this mind-bending statue of the iconic trio of Simon, Kamina and Yoko from the beloved anime "Tengen Toppa Gurren Lagann". Set in a world where humanity is forced to live underground, the series follows the journey of Simon, a timid digger who discovers a mysterious robot known as Lagann. Teaming up with the charismatic and fearless Kamina, Simon set forth on a journey to break free from the subterranean existence and into the vast outer space. Together with an ensemble of friends, they pilot gigantic mechas to defy the tyrannical rule of the Spiral King. Crafted with the utmost skill and attention to detail, our statue immortalizes the dynamic trio in all their glory. Simon, the unlikely hero stands tall and resolute, gaze as piercing as his drill around his neck, ready to take on an obstacle in his path. Kamina, the epitome of bravado, commands attention with his cloak billowing behind him, left hand pointing towards the sky. And Yoko, the crimson-haired sharpshooting beauty, is at the front with an alluring grace, her gaze unwavering as she fights alongside her comrades. The dynamic trio stands atop Lagann, the drill-shaped Mecha, its eyes illuminated with LED ready to pave the way for a brighter future for humanity. Each element of our status has been meticulously sculpted and painted to perfection, playing between different textures and shading, metallic paint and earthy tones, creating striking contrasts to evoke the essence of these beloved characters - their strong and close bond, in the vast and vibrant world of "Tengen Toppa Gurren Lagann" The Deluxe Version adds one additional swappable head-part for each of the trio, accessorizing them with their distinctive goggles and sunglasses. For Simon, we are also adding swappable right-hand part where he holds the Coredrill. And when you order the Bonus Version from our official online store or any authorized distributor, you will receive a swappable Yoko muffler where Boota the Pigmole fits snuggly on her chest. Don't miss your chance to own a piece of anime history with our limited UPMGL-01DXS Kamina, Simon & Yoko with Lagann Deluxe Bonus Version. Whether you are a die-hard fan of the series or a collector of exquisite products, this statue is sure to garner attention from any onlookers. Pre-order now and join Simon, Kamina and Yoko on their journey to defy fate and reach for the heavens! Product Specifications: - Statue Size approximately 38 inches tall [H:97cm W:52cm D:47cm] - Gurren Lagann-themed base - Two (2) Swappable Simon head-parts (Normal and Goggles) - Two (2) Swappable Kamina head-parts (Normal and Sunglasses) - Two (2) Swappable Yoko head-parts (Normal and Sunglasses) - Two (2) Swappable Simon right-hand parts (Fist and Holding Coredrill necklace) - One (1) Swappable Yoko Muffler (Normal) - One (1) Swappable Yoko Muffler with Boota [BONUS PART] - LED-illuminated Lagann Eyes Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"That monster...will never forgive us." - Koichi Shikishima Prime 1 Studio is very proud to reveal the next entry in the Ultimate Diorama Masterline Series: the non-scale UDMGMO-01S GODZILLA Bonus Version from Godzilla Minus One, its latest critically acclaimed cinematic success. An enraged and mutated Godzilla approaches the coast of Tokyo, having suffered from irradiation by nuclear tests of Operation Crossroads, the kaiju looks to seek vengeance and to unleash havoc upon humanity through its newfound powers, bringing Japan to "below zero" following the aftermath of the Second World War. At 27 inches tall, this ultimate Godzilla diorama is bound to make your jaw drop! As usual, our skilled artisans bring you the utmost care and precision when it comes to sculpting and painting to perfection the mutated Godzillasaurus. This version of the kaiju features very rough, and rugged scaly skin, resembling keloid scars instead of the usual crocodilian skin, and you can rest assured that each bump has been sculpted and texturized to a crisp perfection. We've also added LED illumination along its dorsal fin - from the end of the tail, all the way up his back - and in its mouth, as it powers up for a heaven-sundering Atomic Breath upon the now-leveled streets of Ginza. As its enormous four-toed feet narrowly miss a passing train - more LED illumination has been incorporated into raging fires and smokes around this iconic Ginza Cityscape, you can truly feel the chaos and despair of every citizen present at the moment of Gojira's advent. When you order the Bonus Version from our official store or any authorized distributor, you will get a cool title plate display, featuring the international movie logo! Whether you are a fan of the Godzilla franchise or a kaiju collector, do not miss your chance to own this legendary diorama! Pre-order the UDMGMO-01S Godzilla Bonus Version (2023) now and immortalize the King of the Monsters in all its titanic glory. Product Specifications: - Statue Size approximately 27 inches tall [H:70cm W:76cm D:84cm] - Godzilla statue on environmental rubble-themed base - LED-illuminated Mouth and Dorsal Fin - LED-illuminated Fires, Smokes and Building - One (1) Title Plaque Display [BONUS PART] Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"That monster...will never forgive us." - Koichi Shikishima Prime 1 Studio is very proud to reveal the next entry in the Ultimate Diorama Masterline Series: the non-scale UDMGMO-01 GODZILLA from Godzilla Minus One, its latest critically acclaimed cinematic success. An enraged and mutated Godzilla approaches the coast of Tokyo, having suffered from irradiation by nuclear tests of Operation Crossroads, the kaiju looks to seek vengeance and to unleash havoc upon humanity through its newfound powers, bringing Japan to "below zero" following the aftermath of the Second World War. At 27 inches tall, this ultimate Godzilla diorama is bound to make your jaw drop! As usual, our skilled artisans bring you the utmost care and precision when it comes to sculpting and painting to perfection the mutated Godzillasaurus. This version of the kaiju features very rough, and rugged scaly skin, resembling keloid scars instead of the usual crocodilian skin, and you can rest assured that each bump has been sculpted and texturized to a crisp perfection. We've also added LED illumination along its dorsal fin - from the end of the tail, all the way up his back - and in its mouth, as it powers up for a heaven-sundering Atomic Breath upon the now-leveled streets of Ginza. As its enormous four-toed feet narrowly miss a passing train - more LED illumination has been incorporated into raging fires and smoke around this iconic Ginza Cityscape, you can truly feel the chaos and despair of every citizen present at the moment of Gojira's advent. Whether you are a fan of the Godzilla franchise or a kaiju collector, do not miss your chance to own this legendary diorama! Pre-order the UDMGMO-01 Godzilla (2023) now and immortalize the King of the Monsters in all its titanic glory. Product Specifications: - Statue Size approximately 27 inches tall [H:70cm W:76cm D:84cm] - Godzilla statue on environmental rubble-themed base - LED-illuminated Mouth and Dorsal Fin - LED-illuminated Fires, Smokes and Building Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

Prime 1 Studio is pleased to present a long-awaited addition to the Ultimate Premium Masterline Series: The 1/4 Scale Motoko Kusanagi and Tachikoma Bonus Version from Ghost in the Shell: SAC_2045! In the year 2045, after the worldwide economic disaster known as the Simultaneous Global Default, the "Big 4" nations are engaged in a state of perpetual fighting called the "Sustainable War". Against this backdrop, Major Motoko Kusanagi reunites with Section 9 to investigate the newly risen Post-Human threat. And with her is the ever-trustworthy Tachikoma! The talented artists at Prime 1 Studio have, once again, displayed their passionate fandom for anime with this newest Ghost in the Shell offering! This Ultimate Premium Masterline statue is 20 inches tall, as Major Motoko Kusanagi sits on top of her loyal Tachikoma. Designed by series character designer, Ilya Kushinov, Maj. Kusanagi's new look is captured in its pixel-perfect form by Prime 1 Studio. Her face has been sculpted with sublime subtlety, as it has been painted in soft, effusive tones. Perched on her personal transport and protective suit, the young and beautiful leader of Section 9 is decked out in her squad outfit which has been rendered in anime-accurate detail. She looks like she has just stepped out of her Netflix series. Motoko comes with two swappable left arms: One is relaxed and by her side, and the other arm is holding her sidearm into the air. Always ready to help is her loveable, sentient tank: Tachikoma! Prime 1 Studio has spared no effort in reproducing the affable, yet highly effective protective suit/rolling weapons platform! We have made sure to follow Tachikoma's series looks to the letter. In proportion with the Major, Tachikoma presents itself as an imposing and attractive statue to display! With picture perfect styling and that signature, blue coloring, Tachikoma is sure to please even the most die-hard Ghost in the Shell fans. Tachikoma comes with two sets of arms: one set shows Tachikoma's childlike glee as the hands are raised into the air with extended manipulators. While the other set of arms are posed front-and-center, as Tachikoma prepares to fire its in-arm, 7.62x51mm light machine guns. The Major and Tachikoma are situated on top of a Ghost in the Shell-themed, busted pavement, reminiscent of the show's aesthetic, as transparent resin in the back highlights the show's iconic technological look. And if you purchase the Bonus Version from the official Prime 1 Studio online store, you will get a Bonus Head: Maj. Kusanagi wearing her high-tech visor. Undoubtedly, longtime fans of not only the Major and Tachikoma, but also of the whole Ghost in the Shell property in general will want to procure this attractive statue ASAP! So, DIVE IN and get this preordered today! Product Specifications: - Statue Size approximately 20 inches tall [H: 50cm W: 47cm D: 53cm] - Ghost in the Shell: SAC_2045 themed base - 2 Swappable Left Arms for Major Motoko Kusanagi - 2 Swappable Holster for Major Motoko Kusanagi - 4 Swappable Arms (2 x Left and 2 x Right) for Tachikoma - 1 Motoko Kusanagi Bonus Head with Visor [BONUS PART] Please note: For this item, demand is expected to be higher than the available quantity, which may result in allocations or cancellations of quantities ordered. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"The true enemy won't wait out the storm. He brings the storm." - Jon Snow Prime 1 Studio is proud to present the latest addition to the Ultimate Premium Masterline Series: UPMGOT-02UT: Night King Ultimate Version from Game of Thrones! The Massacre at Hardhome. Prime 1 Studio brings you an epic statue from this watershed moment in the Game of Thrones series, where the Night's Watch and Freefolk fought against the White Walkers and their wights. And as Jon Snow made his escape after that brutal devastation, the Night King appeared on the Hardhome dock, raised his arms, and resurrected his wights. And now, our talented sculptors and painters bring to you, that pivotal scene. Standing at over 27 inches on an icy, ramshackle dock, the Night King postures in all his chilling splendor. We have taken care to carve all the intricate details of his wrinkled façade, his ominous stare, and his decrepit, battle-worn armor. We have rendered a faint dusting of snowfall on choice locations all over the Night King's form to call to mind the frigid Hardhome conditions brought about by his mere presence. In this Ultimate Version, flanking the Night King behind him, are two of his resurrected wights. We spared no effort to bring these figures to life, whose exacting details underscore the terrifying nature of these undead creatures. From top to bottom, we have imbued jaw-dropping realism to these figures from the fabric detailing of their clothes, the withered, frozen attributes of their faces and chain mail armor. Stark splashes of dried blood on their hands and weapons round out the blood-chilling scene. Combine the Ultimate Version Wights with the main Night King base for an exceptional set piece. All these gory figures are well-balanced on the Hardhome dock-inspired base that comes together to feature the ancient wooden moor, creepy skeletal remains, discarded weapons and armor...and frozen, translucent waters. We at Prime 1 Studio cannot wait for all the hardcore Game of Thrones fans to get their hands on these striking Premium Ultimate statues! The Ultimate Version comes with Two (2) Intricately designed Wights with unique features, on a separate detachable base. Product Size: 70 x 46 x 58 cm Limited Edition. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"No protectors here. No Lanterns. No Kryptonian. This world will fall, like all the others." Prime 1 Studio is proud to offer the General of Apokolips in the Museum Masterline DC Theatrical Series: The 1/3 Scale Steppenwolf from Zack Snyder's Justice League! 2021's Justice League, Zack Snyder's magnum opus for the illustrious DC pantheon, brings us a new version of the story, and with it, a well-deserved overhaul of Steppenwolf! Ready to take on Earth's forces at over 40 inches tall on his scorched-earth base, Steppenwolf sizes up the folly of the resistance. With the Snyder cut of Justice League, Steppenwolf not only received a fuller backstory complete with pathios and motivation; he also received a gleaming renovation. Sculpting all the intricate detail of this magnificent costume was no easy feat, but Prime 1 Studio was up to the herculean task. Not only that, we made sure to paint this statue in a faithful rendering of the glossiest, shiniest metal paint as to accentuate his new costume from every angle. He may be a bad guy, but he really doesn't have a bad side, so to speak! And to make Steppenwolf even more menacing, we have equipped his left hand with an Apokoliptan axe imbued with New Gods tech and magic! And in his right hand, Steppenwolf clutches the legendary Mother Box. Furthermore, the Deluxe Version comes with an additional right-hand with a tightly clenched fist, an additional straight right-arm with clenched fist, and yet another, more sinster version of the Mother Box. Feel free to elaborate on a variety of storytelling display options! If that's not enough, order the Deluxe Bonus Version and get an additional Bonus right hand holding the mind probe, a living machine that can decipher thoughts and project them as 3-dimensional hologram. Steppenwolf stands his ground on a scorched Earth base reminiscent of his first landing on Earth, when he fights the Amazons to their deaths. His symbol adorns the front of his base, as Apokoliptan tech wraps around it to show where he is longing to go home. So what are you waiting for? Bring Steppenwolf home, the NEW Steppenwolf, to your Justice League film statue collection today! [Product Specifications] - Statue Size approximately 102 x 52 x 54 cm - Zack Snyder's Justice League-themed base - Two (2) Swappable Mother Box - One (1) Swappable Straight Right-Arm with clenched fist - One (1) Swappable Bend Right-Arm with clenched fist or holding the Mother Box - One (1) Swappable Bonus Right Hand holding Mind Probe [BONUS PART] Limited to 500 pieces. Please note: Due to the small edition size and the great demand for this item, allocations are possible. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"Your people must learn to be masters of their own fate." Prime 1 Studio is extremely proud to present an incredible addition to the Museum Masterline Series of Transformers Statues: the Non-Scale MMTFM-36UTS: POWERMASTER OPTIMUS PRIME CONCEPT by JOSH NIZZI ULTIMATE BONUS VERSION from TRANSFORMERS! Josh Nizzi is a master of shape language, known for his highly articulate and detailed futuristic mech and robot designs. He truly understands the way forms move in space and how each piece relates to the next. He is not shy about complexity and how to make it believable in an artistic, visual sense. Prime 1 Studio is once again proud to reveal another breathtaking project with Josh Nizzi. A statue 10 years in the making: POWERMASTER OPTIMUS PRIME! Every square inch of this 39-inch-tall Optimus Prime is packed not only with detail but incredibly realistic detail. Josh's vision is rendered into real-world wires, tubes, gears, and weapons...every panel break, every scratch, every armor piece of this Optimus Prime is just exquisite. The immense power this statue conveys can be seen in its pose and its stance. Prime 1 Studio has poured 110% of their creativity, skill, and artistry into this statue. From top to bottom, Powermaster Optimus Prime is covered in and comprised of wonderfully rendered parts and weaponry. This Ultimate Bonus Version Optimus Prime comes with a host of amazing features already: Shoulder-Mounted Twin-Barreled Cannons and Shields, Arm-Mounted Cannons, and LED-Illumination throughout! Not only that, it also comes with a detachable Fin Funnel Wing Assembly, and a swappable Long Sword! And when you pre-order this Ultimate Bonus Version from our official online store or any authorized distributor, you will receive cool, extra Bonus Parts: Left and Right-Handed Energon Swords! You might want to change your holiday gift-giving plans, to gift yourself this incredible MMTFM-36UTS: Powermaster Optimus Prime Concept Design by Josh Nizzi Ultimate Bonus Version from Transformers! Pre-order it today! [Product Specifications] ·Statue Size approx. 39 inches tall [H:99cm W:107cm D:99cm] ·Cybertronian Environment-inspired Pedestal Base ·Two (2) Removable Shoulder-Mounted Shields ·LED-Illuminated Eyes, Torso, and Weapon ·One (1) Detachable Fin Funnel Wing Assembly ·One (1) Swappable Right-Hand Long Sword ·Two (2) Swappable Left and Right Energon Swords [BONUS PART] [Notice] Prototype samples are shown Final Product details and colors could be subject to change without further notice. Please note that product specifications may differ because each product is handmade. Since the product is still in the development stage, the size (up to 10%) & weight (up to 10kg) may be changed during the production stage. Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

An extraterrestrial species characterized by their hunting of Xenomorphs/Aliens for faith and honor using a combination of highly advanced technology are the Yautja, also widely known as Predators. Prime 1 Studio is excited to present a new piece from the Dark Horse Comics series: Sengoku Predator! The armor design is from the Sengoku era, the main colors are red and gold which gives a nice vibe of Japanese culture. Predator's familiar face has more brutal expression compared to other pieces. He is holding the spinal cord in his right hand, and a huge spear in the left. There are human skulls and skeletons scattered at his feet. The statue measures approximately 35 inches tall and is made with a great attention to details. This is a must have piece for all Predator fans! Product Specifications: - Size approximately 89 x 47 x 41 cm - One (1) specially designed base - Two (2) alternate Portraits Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"I can make it quick, or I can make it much worse." Prime 1 Studio is extremely proud to present to you the highly anticipated next entry to our Ultimate Premium Masterline. From the critically acclaimed post-apocalyptic action-survival game The Last of Us Part II, here is the 1:4 Scale UPMTLOU-02S: Ellie "The Theater" Bonus Version. The thrilling sequel picks up years after the first game. It brings in a different kind of gameplay, featuring two protagonists in a life-and-death struggle against the cannibalistic infected as well as the antagonistic humans, who ultimately fight each other in the end. Ellie Williams comes back from the first chapter, seeking revenge against both the Seraphites and the more than capable, Abby Anderson, who has caused Ellie significant pain and loss. Ellie has grown up into a young woman who is skilled in both fighting and survival. Her story intertwines deeply with Abby's; a desire for revenge and redemption that drives both characters. The amazing artists at Prime 1 Studio bring you this stunning set of statues focused on recreating the intense action and thrilling suspense from this memorable survival narrative. Prime 1 Studio's artists are extremely proud to present this stunning 23-inch-tall statue! They have done their best to make this statue unbelievably lifelike by studying every aspect of the game's assets. They did an absolutely stunning job bringing out the best interpretation of this steely, determined protagonist. The fine details of her hair...the pained expression on her face...the intricate design of the tattoo on her forearm...the backpack with the Firefly brooches, the hints of stern expression on her face trickled with sweat. All are painted to simulate real skin and real-world materials. A second swappable headpiece will allow you to display an alternative angry expression. Ellie stands atop an arched pedestal, stepping on a yellow electrical wire that powers the LED-powered Utility Lamp that shines on her to create an extremely moody atmosphere. Limited to 750pcs, the Bonus Version comes with an additional set of swappable arms that allow you to expand the storytelling of the game, and display Ellie holding a revolver, an iconic and trustworthy weapon that's used throughout the series! The intensity of this scene can be brought to another level by pairing this statue with its other half, the UPMTLOU-01 Abby "The Confrontation". These two beautiful pieces can be displayed side-by-side or back-to-back, depending on which type of dramatic impact that you wish to convey. Only a few games get under your skin and leave you thinking about them long after you've put down the controller. The Last of Us Part II is one such game, Abby & Ellie's numerous clashes can finally be brought to life in the warmth of your home. Pre-Order the UPMTLOU-02S Ellie "The Theater" Bonus Version now and eternalize these memorable characters in your display space. Specifications: - Statue size is approximately 22.8 inches tall [H:58cm, W:42cm, D:24cm] - The Last of Us Part II - The Theater Chapter-themed base - Two (2) Head parts (Normal and Angry) - Powered Utility Lamp with LED illumination - One (1) Bonus Swappable pair of arms holding a Revolver [BONUS PART] Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"You killed my friends... We let you both live, and you wasted it!" Prime 1 Studio is proud to present you the much-awaited next entry to our Ultimate Premium Masterline, from the critically acclaimed post-apocalyptic action-survival game The Last of Us Part II, here is the 1:4 Scale UPMTLOU-01: Abby "The Confrontation". Few games get under your skin and leave you thinking about them long after you've put down the controller. The Last of Us Part II is one such game. Critically acclaimed for its gameplay, characterizations, performances, and visual fidelity, The Last of Us Part II combines a memorable survival horror narrative with pulse-pounding action. The thrilling post-apocalyptic sequel picks up years after the first game and brings a different kind of gameplay, featuring two protagonists in a life-and-death struggle, not only against the cannibalistic infected and antagonistic human enemies but ultimately with each other. Ellie returns from the first chapter out for revenge against the Seraphites and on a more than capable, Abby Anderson. Abby, a skilled survivor, and strong soldier seem to be an antagonist to Ellie at first, however as the game progresses, we come to learn that Abby has her own back story and motivations, she becomes a much more complex and sympathetic character. Her story intertwines with Ellie's; both characters are driven by a desire for revenge and redemption. The amazing artists at Prime 1 Studio bring you this stunning set of statues, focused on recreating the tense action and thrilling suspense from this memorable survival narrative. They have done their best to make this statue unbelievably lifelike by studying the game assets. They did their most impeccable work to be able to bring out the best interpretation of this steely, determined protagonist. The fine detail of her hair... the cautious but aggressive expression on her face... the scarred quality of her skin... the tense ligaments of her arms. All painted to simulate real skin, and real-world clothing and materials. Just shy of 23 inches tall, Abby is more than ready to bludgeon any incoming attacker armed with a hammer. You can also swap out her right arm for one that holds a handgun instead. Her intense gaze shows concentration, carefully on the lookout for any signs of movement from her opponent. Her muscular blood-pumped arms, trickled with sweat show years of dedication and training. She stands atop an arched pedestal, stepping on a yellow electrical wire that powers the LED-lit utility lamp behind her on a column. When you pre-order this Bonus Version from our official online store or any authorized distributor it comes with a third swappable right arm that will allow you to expand your storytelling even further, Abby holds a Molotov Cocktail, an iconic weapon of the series! The intensity of the scene can be brought to another level by pairing this statue's other half, the upcoming UPMTLOU-02 Ellie "The Theater". Whether or not you can get The Last of Us Part II out of your mind, you need to Pre-Order this amazing UPMTLOU-01S: Abby "The Confrontation" Bonus Version now and eternalize these memorable characters. Specifications: - Statue size approximately 23 inches tall [H:58cm, W:42cm, D:21cm] - The Last of Us Part II-themed base - Two (2) Swappable right arms (holding Handgun & Hammer) - LED illumination on Powered Utility Lamp - One (1) Swappable Bonus right arm holding Molotov Cocktail [BONUS PART] Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More

"You guys are pretty good at this stuff." - Ellie "It's called luck, and it is gonna run out." - Joel ?? Amidst a desolate world destroyed by the menace of the Cordyceps fungus, a man who buries his past, and a girl who's yet to experience love, survive together and weave a special bond.??From the masterpiece developed by Naughty Dog, Prime 1 Studio is excited to present UPMTLOU-03DX: The Last of Us Part I Joel & Ellie Deluxe Version!?? ??? This creation is the ultimate diorama, every detail in layout, pose, and coloring has been perfected to breathe life into the delicate graphics and human drama of 'The Last of Us.'?? Joel, with his unwavering determination, embodies the very image fans have yearned for. His battle-hardened face and robust physique, along with his weathered denim and equipment, have been crafted with masterful precision. Ellie, pointing her rifle with subdued fear, mirrors the same attention to detail. From her pronounced expression to the keychain on her backpack, she's there just as you remember her from the game. We've been extra careful in portraying their gestures and positions, letting you feel the bond and mutual battle style that the iconic pair nurtured throughout their grueling journey.?? The Clicker that lunges toward them is also carefully designed to turn up the horror aspect of this diorama. The hazardous fungal growth on its head and its threatening stance heighten the sense of imminent danger for our survivor duo. You can also see a demised infected built into the special base that signifies their late-stage condition.?? ??? The DX version includes 2 heads with different expressions for both Joel, Ellie and one extra head for the Clicker. For the swappable heads, you will get a normal face version and an angry face version each for Joel and Ellie. For the Clicker, an extra head with its face blasted open is included for collectors who?prefer?more gore and intensity in their diorama.?? Not only that, with swappable weapons such as a bat, pipe, and machete, you have the freedom to combine them as you wish and create scenes that are uniquely your own to mimic your in-game playstyle and customizations.?? ?? Prime 1 Studio is immensely proud to bring to life the unmatched bond between the two main characters within the grim and infection-ridden world. Pre-order the UPMTLOU-03DX: The Last of Us Part I Joel & Ellie Deluxe Version to experience the thrilling narrative unfolding right in front of you.?? Specifications: - Statue Size Approximately: 28 inches [H:73cm W:56cm D:64cm] - The Last of Us Part I-themed base - Three (3) Swappable Joel head parts (Fighting, Normal & Angry) - Three (3) Swappable Ellie head parts (Scared, Normal & Angry) - Two (2) Swappable Clicker head part (Normal & Bloody) - Four (4) Swappable Joel right hand parts (Shiv, Pipe, Machete & Bat) - Two (2) Ellie headstands - Two (2) Joel headstands Please note: Due to the size of this item, additional shipping costs may apply. Apart from your location, the actual package size and weight is needed to determine those costs. Both are unknown at this point and may not be available until the product arrives in our warehouse. Read More